![]() ![]() ![]() When the vehicle’s engine is stopped you will often hear a fan, this helps to cool down the engine and reduces the temperature of the coolant. The engine coolant helps to keep the engine cool and as it passes through the engine it is transferred to your car’s radiator, where it continues to cool down via air flow as the car moves. Please make sure the cap is screwed tightly back on when you finish. If you overfill the tank it can cause more pressure in the tank and potentially force the cap off or the seals to break. To top up the coolant unscrew the coolant cap slowly to release any pressure and top up to the maximum level but not above. This can be purchased from motoring supply shops and petrol stations. If you need to top up with new coolant please make sure to use the correct coolant mixture. If the coolant level is low, your engine may start to overheat and this will need topping up urgently. When the engine is cool check if the coolant level is between the minimum and maximum indicators on the outside of the tank. Unscrewing the engine coolant cap while the engine is hot can be dangerous, pressure inside the tank can push steam out very quickly and you may scald your hand, so be careful and use gloves to be on the safe side. Your engine needs to be cold to check the engine coolant, so leave it to cool down for at least 2 hours or overnight if possible. The tank will look similar to the one in the image above with the coloured liquid in the bottom. The engine coolant tank is not always in the same position in all cars, so if you are unsure where your tank is please refer to your vehicle handbook. We’ve put together some information on how to check your coolant and identify any problems. Every car needs engine coolant to keep it running smoothly and you should check this at least twice a year, ideally in early Summer and the Winter.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |